Ms. Pac-man

Scans of Ms. Pac-man Sideart

I love little surprises like this.

I had a visitor (Kevin T.) stumble on my post about the Ms. Pac-man stencils that Joymonkey was working on last fall. I haven’t heard anything from Joymonkey, but some BYOAC members have reported that they got their stencils and are just waiting for nicer weather to use them. Kevin was looking for a set because his Ms. Pac-man artwork has the typical fade where there is no longer any pink, only yellow.

I know that many members over the years have probably scanned in the Ms. Pac-man cabinet artwork, and I know Joymonkey scanned it in from scratch when he remade the vector file for the stencils. But as far as I know, there aren’t any websites out there that have the scanned Ms. Pac-man available to download at this time. If you know of any other websites with a good Ms. Pac-man artwork scan, leave a comment and let’s start a list here. Joymonkey said he’d release his Ms. Pac-man vector file, maybe his sideart scan, once his stencils are done. But I don’t know if and when that might be.

Kevin spent a lot of time working on these scans, I mean a ton of time scanning in the Ms. Pac-man cabinet. But anyone who has attempted scanning arcade artwork before, knows how time consuming scanning can be. And not only do I have the composite files of the artwork, I have the individual pieces, all in two zip files. If you get a chance, leave a comment here and thank him for his time. I’ll make sure he gets the thank you. It sounds like he may attempt to also scan the Ms. Pac-man kickplate artwork, so let’s keep our fingers crossed.

The other note I should mention, Kevin expressed to me that these are a touch inaccurate in that some of the lines don’t align correctly. But, at first glance the artwork composite looks good, and if you don’t like the composite, you can remake your own full Ms. Pac-man sideart with the scan pieces. He shared a link on where with me on where the files are hosted, so just click on the images below for start downloading the zip files.

Ms. Pac-man Sideart Scan Left SideMs. Pac-man Sideart Scan Right Side

I am posting this brand new today, and don’t know how long it will be online, so get the files while you can. I am sure I may get some sort of nasty email from a nasty company who make a shoddy poor product with someone who would gladly take your money for an incorrect product (read dishonesty) for a President. But for a short while, you’ll have the artwork files available to you at least to do with them as you please.

Has anyone else used MediaFire to host files? It says there isn’t a time limit for hosting, but if the files aren’t downloaded frequently enough, will they remove them? I was able to successfully download the files, is anyone having any problems downloading the zips?

~Edit – In case you have issues downloading the scans of the Ms. Pac-man artwork from the links above at Mediafire, you can try to download them from this website mirror.


Ms. Pac-man Stencils on BYOAC

When I first got into the arcade game collecting hobby, the one game I wanted was a Ms. Pac-man. A common game that is easy to come by, but one I grew up with and have the fondest memories playing. (more…)


Worked on Ms. Pac-man separations

Got through miscellaneous pieces of the seps. I started on the large ghost, I worked on the middle ghost at the bottom, and I also worked on the little Ms. Pac at the top. I also deleted some of the extra layers and separates out the easy patterns.


Ms. Pac-man Separations Update

I had some downtime where I couldn’t use the internet last night so I spent about 25 minutes or so working on the separations for the stencils. I got through a good portion of Ms. Pac-man herself.

I am trying to decide how to make a rule for how much the pink should bleed underneath the black, or if every piece should bleed according to what is around it. If I can make the pink larger underneath a surrounding black part, like on her gloves and such, I think I am just going to go ahead and make it as big as possible. This will give me more coverage in some areas in case the registration is off.

I did find out that the stencils are a one time use though. So, even if I finish the separations for the Ms. Pac-man sideart, there is no guarantee I may get some because of the cost. I don’t have any of the tools, the mask, the airbrush, or the paints, so above the cost for the three colors of stencils I will have to invest in the other supplies. I will have to make some sort of decision of whether or not I will use that equipment again or not.


Ms. Pac-man Stencil Separations

I bought my Ms. Pac-man last October, and even when I bought it I knew that someday I wanted to either redo the sideart or get a cabinet that had more pink in the sideart.

I have thought about checking around for how much stencils would be, but hadn’t gotten around to it. I have monitored buying another Ms. Pac-man machine and switching cabs, but a deal hasn’t fallen in my lap yet, and Saturday I took the time to email a prominent collector who also does repro art and is well known for his quality stencils about making up a set.

He said he didn’t have the artwork for Ms. Pac-man separated. There is a vector set on localarcade.com, but it needs another set of processing to be ready to produce stencils.

Brian Jones (Prok) said he would work with me if I could get the separations done. I don’t know any printers that I feel like I could go to and have the stencils done for some sort of barter, so I have decided to start on it myself.

Brian has given me some basic instructions and I have an understanding of what he needs. He needs each color in different layers in Illustrator in the order that the color would be laid down on the cab. In the Ms. Pac-man case for stencils, it would be the base blue color, then the yellow, then the pink and finally the black.

Since I have not done this before, I am relying on my sense of 3d and general graphic experience to visualize how the paint would need to be laid out and in which order. I did a sample piece of the artwork, and Brian said I had the right idea so hopefully I can crank through and get it done.

We are still talking about how much it would it would cost to make them. I need to keep it cost effective just in case of a bad situation where I have to sell the game, I can’t get too much into it for that reason.